Budget 408-Inch Stroker Ford Windsor Makes 535 HP On Pump Gas!
How much HP does a 408 stroker have?
Our entry level 408 stroker Ford performance engines boast an honest 450 horsepower and 500 torque and run on premium pump gas. This part number is perfect to upgrade from your old 351W.
How much HP does a 408 LS make?
Equipped with the 224 cam and tuned to perfection by Westech’s Ernie Mena, the 408 produced 584 hp at 5,700 rpm and 566 lb-ft of torque at 4,700 rpm.
What makes a 408 stroker?
Our 408 Stroker Crate Engine is built with a 350 block and a 4-inch stroker crank. That’s right! A 350 Chevy with the same block clearance as a 383 and a standard base circle cam houses a big block stroke and 6-inch rod. The torque in this thing will give you goosebumps!
What size is a 408 motor?
You’ve probably already figured out from the title of our story that we’re going with 408 cubic inches (6.7L), which is accomplished with a 4.030-inch bore and 4.00-inch stroke.
What bore is a 408 Windsor?
Ford 351 Windsor: Standard Heads: 408 – Flat Top: 1.358 C/H – 4.030 Bore -3.00CC – #99826 – Ross Racing Pistons.
How big can you stroke 351W?
The cylinder skirts are notched to clear the Chrysler 360ci small-block connecting rods. The 351W gets stroked a half-inch by fitting the block with a 400M crankshaft (the 400M is a tall-deck Cleveland). Keep in mind the 351W has a 3.50-inch stroke while the 400M has 4 inches of stroke.
What LS can handle the most HP?
Biggest LS Crate Engines
- BluePrint 625 hp/427 cu-in LS Retrofit Crate Engine.
- Chevrolet Performance 627 hp LSX 454 Crate Engine.
- Chevrolet Performance 650 hp/6.2-liter LT4 Crate Engine.
- Boost District 750 hp LSX376-B15 LS Crate Engine Package.
- Prestige Motorsports 800+hp Supercharged 427 cu-in LS Next Crate Engine.
What LS has the most HP?
LS9
LS9: The Most Powerful LS to Date Thanks to Boost
The LS9 (6.2 liter, 376ci) was the first LS variant to get a supercharger, making it the most powerful LS from GM at 638 hp.
What’s the strongest LS motor?
LS7: Best.
LS Engine. Ever. In a world with 650hp Camaro ZL1s, along with even more powerful Hellcats and Shelby Mustangs, it’s easy to forget the influence and importance of the LS7-powered Corvette Z06. Before it, there were precious few production cars that boasted horsepower levels of 500 or greater.
Do stroker motors make more power?
The lengthened piston stroke increases the amount of air and fuel forced into the cylinder, boosting the overall power of the combustion cycle and delivering more energy to the crankshaft, resulting in more torque delivered to the transmission and the vehicle’s wheels.
How much HP does a 416 stroker have?
608 hp
After the guys at Westech worked their tuning magic, the 416 stroker LS3 made its best pull of 608 hp at 6,200 rpm and 565 lb-ft at 5,200 rpm.
How much power do stroker kits add?
In theory, Alan explains, it means roughly 14.9-percent more power. This means a 350-horse 302 can produce more than 400 horsepower under optimum conditions. Alan stresses that this is strictly theory because engines are the sum total of the parts and technique we use.
Is a 408 an LS motor?
CHEVROLET 6.7L/408 Chevy small block Gen III/IV (LS-based engines) Parts and Accessories.
What is the biggest cubic inch motor?
GM’s 1,000 hp 632 cubic-inch crate engine is its largest and most powerful ever.
What is a Chevy 408 engine?
408 Chevy Long Block
Our 408 Stroker Crate Engine is built with a 350 block and a 4-inch stroker crank. That’s right! A 350 Chevy with the same block clearance as a 383 and a standard base circle cam houses a big block stroke and 6-inch rod. The torque in this thing will give you goose bumps!
How much horsepower does a 427 Windsor have?
Horsepower peaked at 597 at 6,600 rpm, and torque increased slightly to 556 lb-ft. A few more tweaks and we saw horsepower top out at 609, while torque rose to 561 lb-ft. Up to this point, the engine was run with a water temperature of no more than about 120 degrees.
Why is it called a Windsor engine?
The 351W is named for the factory in Windsor, Ontario that produced them. It is part of the long-running Ford small block Windsor V8 family, which also includes the venerable Ford 302 (5.0L) V8.
What is the best bore to stroke ratio?
We hear a lot of engine builders shoot for a ratio between 1.5:1 and 1.8:1 on a street motor, with 1.75:1 considered ideal, regardless of application. The most highly developed four-stroke engines in the world – Formula 1 and motorcycle engines – have rod ratios of more than 2:1.
How much HP can a 351W take?
Capable of exceeding 700 hp each, we had more than 1,400 hp worth of turbos for the 351W.
Can you make a 427 out of 351W?
If you want to go to 427 or even up to 454, you need a 351 W (Racing) block or one of the new aluminum blocks that allow you to bore it out to . 125 over and then you can put a stroker crank in that does not have that hugh throw on the rod.