Where the wood packaging was not produced in Canada or the United States it must possess an ISPM 15 mark. Wood packaging that has been repaired or re-manufactured in Canada must be marked in accordance with policy directive D-13-01: Canadian Heat Treated Wood Products Certification Program (HT Program).
Why do Canadian regulations only permit heat treatment for wood packaging?
Wood packaging imported into Canada is regulated under an international standard, ISPM No. 15, to prevent invasive species from being introduced into our country. This standard requires wood packaging to be heat-treated or fumigated and then marked to indicate that it has been treated.
Do I need to use heat-treated pallets?
For pallets that will remain inside the United States and products that will never be exported, no heat treating or fumigation is required. Only pallets (or lumber, crates, and other forms of wood packaging) that will be exported to other countries need be heat treated.
What Canadian government agency is responsible for establishing entry requirements for wood packaging material into Canada?
The Canadian Food Inspection Agency (CFIA)
The Canadian Food Inspection Agency (CFIA) is responsible for the policy aspects of the International Standards for Phytosanitary Measures No. 15.
What wood are pallets made of in Canada?
You will commonly see softwood pallets referred to as SPF softwood pallets. SPF stands for spruce, pine, fir as softwood pallets in Ontario are typically made from a combination of those three woods.
What countries require ISPM 15?
Countries participating in ISPM 15
- Austria.
- Belgium.
- Bulgaria.
- Croatia.
- Cyprus.
- Czech Republic.
- Denmark.
- Estonia.
Do I need heat-treated pallets for Canada?
Wood packaging material entering Canada and originating from any country other than the continental United States, must meet the following requirements: The wood packaging material must be heat treated or fumigated using methyl bromide at rates specified in policy directive D-98-08.
How do I know if my pallets are heat treated?
Look for the IPPC stamp on the side of the wood to determine how it was treated. Pallets marked with an “HT” were heat-treated and did not come into contact with chemicals during the treating process. Avoid unmarked pallets or those stamped with an “MB” for methyl bromide.
Is plywood exempt from ISPM 15?
It applies to the treatment of wood materials greater than 6mm, and it states a set of criteria that must be met when using any wood as packaging such as a crate, pallet, or dunnage. Products like cardboard, plywood, and plastic are exempt from ISPM-15.
How long does ISPM 15 treatment last?
ISPM 15 will last the lifetime of the pallet. So once it has been heat treated it can be used throughout the entire lifetime of the pallet and will not require re-treatment.
What are the requirements for food packaging in Canada?
The Canadian FDRs include general safety requirements for food packaging in Section B. 23.001, which state, “No person shall sell any food in a packaging that may yield to its contents any substance that may be injurious to the health of a consumer of the food.” The burden to ensure safety falls on the food seller.
Can you send wooden items to Canada?
Primary wood products, pulp and paper products, as well as wood-fabricated materials are all acceptable. This includes commonly used materials like planks, plywood, and industrial lumber. You can also import furniture and items in wood packaging.
WHO issues phytosanitary certificate in Canada?
the plant protection organization of the exporting country
A phytosanitary certificate is an official document issued by the plant protection organization of the exporting country to the plant protection organization of the importing country.
What type of pallets does Costco use?
Costco accepts general use block pallets in their facility. Stringer pallets are not allowed as general use pallets. Pallets must have the ability to handle 2500 pounds of lowest layer weight when they are loaded with more than 750 pounds.
What are the 3 commonly used pallets?
Here are some common types of pallets you might find in a warehouse, or at the back of your local grocery store:
- 1.Block Pallets. These pallets are known for their four-way entry, meaning they can be accessed by forklifts on all four sides.
- 2.Stringer Pallets.
- 3.Double-Face Pallet.
- 5.Solid Deck Pallet.
What are the two types of pallets?
7 Types of Pallets Based on the Configuration
- #1 – Roto Molded Pallets. Roto-molded pallets are made using a rotational molding method.
- #2 – Injection Molded Pallets. Courtesy: www.plasticpallets.cc.
- #3 – Block/Deck Board Pallets.
- #4 – Stringer Pallets.
- #6 – Double Wing Pallets.
- #7 – Solid Deck Pallets.
Do you need heat treated pallets to ship to USA?
“All wood packaging material entering or transiting the United States, [except] wood of Canadian origin entering from Canada, must be heat-treated or fumigated and be marked with an approved logo certifying that it has been appropriately treated.
How do I get an ISPM 15 stamp?
In order to get the ISPM15 stamp, must wood products be both heat treated and fumigated? Under ISPM15 standards, it must be either heat treated to 56 degrees Celsius to the core for 30 minutes, or fumigated with methyl bromide. It does not need to get both treatments.
Do I need heat treated pallets to ship to Europe?
After January 1st 2021, all pallets exported to the EU will need to be ISPM 15 compliant (heat treated to a certain standard, and visibly stamped with two clear markings).
What do I need to ship a pallet to Canada?
You need a Bill of Lading and a Canadian Commercial Invoice (CCI) Shipment value must be indicated on the Commercial Invoice. Fees are paid by the receiver.
How long does pressure treated wood last in Canada?
40 years
While pressure treated poles can stay up to 40 years without any signs of rot or decay, decks and flooring might only last around 10 years.