Dig holes Posts need to be set below the frost line to prevent heaving. For regular privacy fences, holes need to be at least 36 inches deep or half the fence height, whichever is greater, plus six inches for base gravel.
How far down is frost line Ottawa?
How deep do you drill? Due to Ottawa’s 3.5ft frost lines we consider that to be our desired depth. For decks, we attempt to reach 4-5ft. For fencing, our footing depths range from 3-4.5ft.
Is 2ft deep enough for fence posts?
For an average fence post, about 6 to 8 feet tall, prepare to dig a post hole about 2 feet deep. To install a fence post, you’ll need a shovel or post digger, a 6-foot level, soil, and gravel or crushed stone. For gateposts, you’ll need concrete too.
How deep do I need to put my fence posts?
The depth of the hole should be 1/3-1/2 the post height above ground (i.e., a 6-foot tall fence would require a hole depth of at least 2 feet).
How deep should a fence post be 4×4?
3.1 – Dig post holes 10″ to 12″ in diameter and 3′ 6″ to 4′ deep.
Can my neighbor build a fence on the property line in Ottawa?
No person shall erect or cause to be erected, on residential property or on lot lines of non-residential property abutting residential property, a chain link fence that is not vinyl or powder coated.
Do fence post need to be below the frost line?
All fence posts should be cemented in the ground below frost level. Check your local frost level and dig deeper by at least 6″.
How deep do fence posts need to be in Ontario?
Dig holes
Posts need to be set below the frost line to prevent heaving. For regular privacy fences, holes need to be at least 36 inches deep or half the fence height, whichever is greater, plus six inches for base gravel. Lower fences will not likely need to be as deep (or you may use ground spikes instead).
How many 50lb bags of concrete do I need for a fence post?
At least 2 bags per fence post, sometimes more depending on the size of the hole and the post.
Can you put dry concrete in a post hole?
Fast-setting concrete is ideal for setting posts because there’s no mixing—you simply pour the dry concrete from the bag right into the hole, then add water.
Do 4×4 fence posts need concrete?
Most use concrete to create leverage. The main reason is the post length of choice for fence companies is often a 4″ x 4″ x 8′. As a result, the fence post is only two feet in the ground on a six-foot in height wood fence. Hence the use of concrete.
How deep should a 10 foot fence post be?
The general rule of thumb when setting a post is that the depth of the post’s hole needs to be one-third to one-half of the actual above-ground height of the post.
How deep should a 7ft fence post be?
A rule of thumb is that 1/3rd the height of the fence panel should be reflected in how deep the post should be.
Should wood fence posts be set in concrete?
It doesn’t matter if it is a do-it-yourself (DIY) project or a professional installation, wood fence or vinyl fence, your fence posts should be set in concrete. Without a properly set concrete footer, your fence posts will begin to sag until they eventually fail.
How tall should a fence post be for a 6 foot fence?
Post lengths for fences start at 8 or 10 feet for a 6-foot-tall fence. They are commonly four-by-fours, which measure approximately 3 1/2 by 3 1/2 inches, or six-by-sixes, at around 5 1/2 by 5 1/2 inches.
How do you keep a 4×4 fence post from rotting?
Applying a seal or stain to your wooden fence can help provide an additional level of protection against rot. You can choose to use a water repellent sealant to your wood to help keep rot-causing moisture out from your fences.
What is the 7 year boundary rule?
The Seven Year Rule
So this is different from the so called ‘Seven year rule’ which comes from Section 157(4) of the Planning and Development Act 2000. This means local authorities can’t serve enforcement notices for an unauthorised development when seven years have passed since the commencement of the development.
Can you put up a fence without your Neighbours permission Ontario?
A person can’t build a fence on property that’s not theirs — unless they get permission to do so. It is the property owner’s responsibility to ensure they locate the property line accurately. A land survey can help identify the location of a property line.
Can I replace my fence without Neighbours permission?
You shouldn’t make any changes to walls or fences without their permission.
What can I use instead of concrete for fence posts?
There are a few options for materials to set your fence posts if you aren’t using cement. These include dirt, gravel, sand, and crushed rock. Dirt: Filling the hole with dirt and compacting it will help to support the fence post.
Do you need gravel under posts?
DO Employ a Base Gravel Layer. If a fence post fails without any sign of a pest infestation, it’s likely that the failure was caused by moisture that rotted the wood over time. To help slow such deterioration, add pea gravel or crushed stone to the bottom of the posthole.