Article 341 of the Code states that a driver of a road vehicle cannot pass a bicycle within the same traffic lane (in other words, without crossing into the oncoming lane on a two-way road) unless there is enough room to do so safely.
Are you allowed to overtake a cyclist?
You may cross a double-white line if necessary (provided the road is clear) to overtake someone cycling or riding a horse if they are travelling at 10 mph or less (Rule 129).
Is close passing a cyclist illegal?
However, if motorists are caught driving too close to cyclists as they overtake them, they run the risk of being fined under section 3 of the Road Traffic Act 1988 – for careless driving.
When passing a cyclist you must allow at least?
When passing a cyclist, as a best practice, allow at least one metre between your vehicle and the cyclist. Whenever possible, you should change lanes to pass. Do not follow too closely behind cyclists.
How do you pass a cyclist?
Overtaking Other Cyclists
Take the lane as you approach so that you can give a slower cyclist plenty of room as you overtake. The other cyclist might not hear you and you don’t want them to be surprised and wobble – into you or the kerb. Don’t swing left too soon after you pass.
Can you cross unbroken lines to overtake a cyclist?
Yes, road rules allow you to cross over unbroken lines to overtake a cyclist in NSW. Maintaining a safe passing distance when overtaking a bicycle rider is paramount to avoid these circumstances occurring to you.
Do you have to indicate to pass a cyclist?
When planning to overtake a cyclist with oncoming traffic, a brief signal is generally beneficial—especially when the road is relatively narrow. On a wider road, it may be possible to overtake without a signal.
What is the distance to pass a cyclist?
1.5 metres
Ideally, allow at least 1.5 metres between you and the cyclist. Wait for a clear space before passing a cyclist on a narrow road. At intersections, apply the same rules to cyclists that you would to any other vehicle on the road.
Do cyclists have priority over cars?
It now states that pedestrians have priority when crossing road junctions, and cyclists have priority whilst passing turning vehicles.
Can you overtake a cyclist on a roundabout?
The new section under Rule 186 says that road users should give priority to cyclists on roundabouts. It states: “You should give priority to cyclists on the roundabout. “They will be travelling more slowly than motorised traffic. “Give them plenty of room and do not attempt to overtake them within their lane.
When passing a cyclist you must leave at least 4 feet between you and the cyclist?
When you pass a bicyclist, slow down and pass the bicyclist only when safe, allowing for a minimum of 3 feet between your vehicle and the bicyclist where possible.
Should you honk at a cyclist?
Don’t Honk Your Horn
You might also honk because you’re frustrated with the cyclist on the road. Cyclists, however, have the same rights as other motorists and must be treated as so. Startling a cyclist could cause them to lose control of their bicycle and crash.
What are the 5 rules the all cyclist should obey?
The League’s five Rules of the Road prepare you for safe and fun bicycling no matter where you’re riding.
- Follow the Law. Your safety and image of bicyclists depend on you.
- Be Predictable. Make your intentions clear to everyone on the road.
- Be Conspicuous.
- Think Ahead.
- Ride Ready.
What is the 75 rule in cycling?
The 75-percent rule states that during a given training week, at least 75 percent of your miles (or time) should be at or below 75 percent of your maximum heart rate (MHR).
Does Rule 169 apply to cyclists?
Rule 169 of the Highway Code does not mean that cyclists have to pull over for passing traffic, although police officers may suggest riding further to the left if it is safe to do so. If the cyclists deems that the conditions are not safe for overtaking they are able to ride in the middle of the lane.
How much room do you need to overtake a cyclist?
At speeds of 30mph or above, the Highway Code recommends a car width may be needed to overtake safely. Rule 139 of the Highway Code states “give cyclists at least as much room as you would a car when overtaking”. Rule 188 of the Highway Code states “When passing a cyclist give them plenty of room”.
Where should you never overtake a cyclist?
Always avoid overtaking cyclists on bends, especially where you can’t see what’s around the bend. Avoid overtaking a cyclist when approaching a junction such as a T-junction or roundabout. Never overtake a cyclist if they look like they are going to change direction, especially crossing your path.
What is the new law for overtaking cyclists?
The Highway Code now includes updated guidance on safe passing distances and speeds for people driving or riding motorcycles. The updated code says they must leave at least 1.5m when overtaking cyclists at speeds up to 30mph, “giving them more space” when overtaking at higher speeds.
Can you overtake a cyclist on a continuous white line?
When overtaking, never cross a continuous white line.
Do cyclists have priority over pedestrians?
Within the hierarchy, pedestrians have priority over cyclists, who in turn have priority over horse riders.
Can you fail for not indicating?
Fail the driving test Whilst Moving off from a stationary position. This is a very common test failure as many learners seem to get confused as to what they should do. This often results in a test fail due to no indicating or inappropriate indicating or lack of appropriate observations (usually the blind spot).