The numbers that run North and South count the Township lines and the numbers that run East and West count the Range lines. One “square” on the Saskatchewan Grid Map is called a Township. A full Township consists of 36 Sections and is approximately thirty-six miles square in size.
How do you read legal land locations?
The legal description of land follows a set sequence of quarter section, township, range, and meridian: the designation NW 27-9-25 W2, for instance, means the Northwest Quarter of Section 27 in Township 9 Range 25 West of the Second Meridian.
How do you read a township and range description?
Following the base line east or west of the meridian line generates the range number, while following the meridian line north or south of the base line gives the township number. So, township 2 north, range 3 west means you are two north of the base line and three west of the meridian line.
What does land location mean?
Description of Land (Location with name or road/roads on/off which the property and boundaries).
How is land measured in Saskatchewan?
A Section is made up of 4 Quarter Sections. The Quarters in a Section are described as the North East (NE), North West (NW), South East (SE) and South West (SW) Quarters. Each Quarter Section is approximately 160 acres (65 hectares) and is described by its compass direction. For example, North and West = NW ¼.
How do you read a plot of land?
Plat maps list the house number for each parcel, along with the shape of the parcel, or the parcel boundary. The small numbers along the bottom of the parcel is the width, and the number along the right side of the parcel is the depth. Most plat maps have these numbers in feet.
How do you read the coordinates of a property?
Degrees, minutes, and seconds are the units of measure for property survey bearings. For example, N 38° 03′ 09″ E would translate as 38 degrees, 3 minutes, 9 seconds from the north to the east. The boundary lines, or “legs,” are often denoted in feet and listed directly below or after the bearing.
How many acres is in 1 section?
In U.S. land surveying under the Public Land Survey System (PLSS), a section is an area nominally one square mile (2.6 square kilometers), containing 640 acres (260 hectares), with 36 sections making up one survey township on a rectangular grid.
Why is a township 6 miles square?
The lines are 6 miles apart in every direction, so they create squares called “townships”. A square that measures 6 miles on each side has an area of 36 square miles (6 times 6), so each township covers 36 square miles.
Is a township 6 miles by 6 miles?
Townships (normally 6 miles by 6 miles) are numbered starting with Township 1 North (of the base line) to the Canadian border and Township 1 South to the California border. The Ranges are numbered west from the meridian to the Pacific Ocean and east to the Idaho border.
How do you identify location?
The most common way is to identify the location using coordinates such as latitude and longitude or by the use of a street address when available. Absolute location can also be the name of the city or region or postal code a point is located in although this is less precise than using coordinates or an address.
What does location location mean in real estate?
In a nutshell, location, location, location means identical homes can increase or decrease in value due to location. The saying is repeated three times for emphasis, and it is the number one rule in real estate, though it is often the most overlooked.
What does property location mean?
Place where real estate is situated. The geographic location of property affects its value. For example, real estate in a good neighborhood is worth more.
How are land areas measured?
By convention, then, land area is measured on a two-dimensional common surface plane projected onto the ground. So even in hilly terrain, the acre is measured as if the hill were cut off at the horizontal, parallel to the horizon.
How is residential land measured?
In case of a residential property, the area is usually given in the form of Square Feet (sq ft). However, in the case of agricultural lands, the property area is mentioned in terms of Acres or Hectares. In order to measure the land size, you need to multiply the length and the width of the available land.
How is land usually measured?
ACRE The unit of land area in the United States is the acre. An acre contains 43,560 square feet.
How many acres is 1 plot?
An Acre is a propduct of any rectangular plot of land giving a total of 4,046sqm OR 43,560sq ft. An Acre consist of 6 plots each measuring 6 x 120ft.
How do you read a plot plan?
Tips on How to Read a Site Plan
- Find The Title Block. In the bottom right corner of most plans, you’ll find what’s called a title block.
- Learn the Plan’s Scale.
- Determine the Orientation of the Plan.
- Know the Datum Point.
- Note the Site’s Contours.
- Locate Existing Structures.
How are land coordinates written?
Enter coordinates to find a place
Here are examples of formats that work: Decimal degrees (DD): 41.40338, 2.17403. Degrees, minutes, and seconds (DMS): 41°24’12.2″N 2°10’26.5″E.
What is coordinate number in land?
Coordinates are used for describing the exact position of a location on the ground, or on a map or plan. They normally take the form of figures that indicate the distance of the location concerned from the two coordinate axes.
What are land coordinates?
The system of plane coordinates is established for defining and stating the positions and locations of points on the surface of the earth within the State and any land description in which it is used shall be designated as the Land Coordinate System of Yap Islands.