Tap water, well water and commercially bottled water (except carbonated, vitamin, mineral or flavoured water) can be given to infants, either for drinking and/or in the preparation of food and other beverages, provided that it comes from a trusted source and/or has been tested.
Do you have to boil water for formula in Canada?
Canadian experts recommend boiling water—even bottled water—for infants. Heat the water until it reaches a rolling boil, and continue boiling for 2 minutes. Let the boiled water cool before mixing it into a powdered or concentrated formula.
What water to use for baby formula Canada?
Boiled water that has been cooled to room temperature can be used to prepare powdered infant formula. Serve formula as soon as possible after it has been prepared. Remember, once you’ve started feeding your child, the bottle should be used within 2 hours.
Is it OK to make formula with tap water?
You can use any type of clean water — tap or bottled — to prepare liquid-concentrate or powdered formula. If you’re concerned about the purity of your water supply, talk to your baby’s doctor or your water provider. Many public water systems will test drinking water upon request.
What happens if you mix baby formula with tap water?
Can I use fluoridated tap water to mix infant formula? Yes, you can use fluoridated water for preparing infant formula. However, if your child is only consuming infant formula mixed with fluoridated water, there may be an increased chance for mild dental fluorosis.
Can you use tap water for formula without boiling?
Distilled or purified water can be used without boiling it. All other water should be boiled then cooled as described below. This includes all other bottled water and all tap water.
When can babies drink tap water Canada?
6 months
Small amounts of water may be introduced as a beverage, in an open top cup after 6 months of age. Water should not replace the intake of breastmilk or infant formula in the first 12 months of age. After one year of age, water should be used to quench thirst between meals and snacks.
What kind of water is safe for baby formula?
Virtually any type of bottled water can be safely used for mixing formula. This includes purified, distilled, deionized or demineralized water. Using bottled water is the best way to ensure the water is safe, and also has the advantage of not containing additional fluoride.
When can babies drink tap water with formula?
Even though giving your baby water may seem harmless, it’s not recommended until your little one is 6 months old. Your baby is getting all the nutrients and hydration she needs from breast milk or formula. With all those feedings, you’ll also be doing lots of diaper changes.
What happens if you don’t boil water for formula?
Powdered infant formula milk is not sterile. Even though tins and packets of milk powder are sealed, they can still contain bacteria. Water that hasn’t been boiled can also contain bacteria. Formula therefore needs to be made up with water hot enough to kill the bacteria, which is at least 70 degrees C.
How do you clean tap water for baby formula?
Here’s how to boil water before using it to make infant formula: 3,4
- Pour cold tap water into a pan.
- Bring the water to a rolling boil on the stove.
- Allow the water to boil for 1 minute.
- Take the pan off the heat and allow the water to cool for 30 minutes before preparing a bottle.
Can you use tap water for baby milk?
When preparing infant formula for babies, you’ll need to boil fresh tap water and let it cool for no more than 30 minutes, so that it remains at a temperature of at least 70C. Bottled water is not recommended for making up feeds, as it’s not sterile and may contain too much salt (sodium) or sulphate.
Can you use distilled water for baby formula Canada?
For formula, it has been shown that you should use distilled water. Boil your water and let it cool to 70 C, then add the formula mixture. According to Health Canada, any water you give a baby under four months of age should be brought to a boil for two minutes and then cooled to make sure it is sterile.
When can I stop boiling water for formula?
6 Sterilizing water for healthy term infants has historically been recommended until infants are four months of age. By four months infants are commonly putting many non-sterilized objects in their mouths. Therefore four months has been chosen as the age for discontinuing the sterilization of water.
Can I use filtered water for formula?
For your baby, it’s best to choose bottled water that is low in both sodium (less than 200 mg per liter) and sulfate (less than 250 mg per liter). You can also use filtered water in your baby’s formula.
Why can’t infants drink tap water?
It’s because babies’ bodies aren’t suited for water until several months after birth. Tiny tummies and developing kidneys put them at risk for both nutrient loss and water intoxication.
Do you have to use distilled water for formula?
Pediatricians and formula makers recommend using distilled water for baby formula because it is clean and free of possible contaminants like lead, pesticides, bacteria, viruses, nitrates, and more. The damage from ingesting these toxins can lead to lifelong health problems, or in extreme cases, death.
Why do you have to wait 30 minutes before making formula?
For a bottle of formula, prepared at 70°C to cool to a safe temperature of approximately 37°C, it will need to sit for at least 30 minutes, possibly longer. This may allow bacteria time to multiply and is contradictory to usual safety advice for any other foods.
Can I make formula with cold water?
Use fresh water from the cold tap to fill your kettle every time you make up formula. Do not use water that has been previously boiled or artificially softened water. Bottled water is not recommended to make up a feed as it is not sterile and may contain too much salt (sodium) or sulphate.
What happens if you don’t use distilled water for formula?
Using distilled water for baby formula will protect your baby from fluorosis. If your tap water contains fluoride and your baby’s main source of food comes from mixing a power or liquid-concentrate formula with water, then you might run the risk of your child developing faint white lines or streaks on their teeth.
Do you need to sterilize baby bottles Canada?
Hands should be thoroughly washed using soap and lukewarm water. Bottles, spoons and nipples should be sterilized in boiling water for 2 minutes and then air-dried before use or storage. Bottles and equipment should be left covered until ready-for-use.