Now you can, because Performance Automotive Warehouse (PAW) makes it possible by taking Ford’s venerable 351ci Windsor small-block and stroking it to 427 ci. Stroking an engine to achieve greater displacement is nothing new. It’s a common sense approach to getting an engine to produce more power.
How much horsepower can a 351 Windsor make?
2015 issue, in fact—we documented the build of a pretty potent 351W build that ended up making 505 hp with the stock crankshaft and connecting rods, a set of KB flat-top hypereutectic pistons, a mild Crane hydraulic roller cam, and a pair of Trick Flow Specialties’ 190 CNC 11R cylinder heads.
Can you make a 427 out of 351W?
If you want to go to 427 or even up to 454, you need a 351 W (Racing) block or one of the new aluminum blocks that allow you to bore it out to . 125 over and then you can put a stroker crank in that does not have that hugh throw on the rod.
What can you bore a 351 Windsor to?
U can safely bore it to . 060″ os without any trouble.
Is 302 and 351W same block?
A 351W block is taller. So, the distributor mount is below the block surface where the intake sits. There is also more space between the water passages and the cylinder heads.
How much can you stroke 351 Windsor?
The 351W gets stroked a half-inch by fitting the block with a 400M crankshaft (the 400M is a tall-deck Cleveland). Keep in mind the 351W has a 3.50-inch stroke while the 400M has 4 inches of stroke. PAW takes a 400M crankshaft and removes the ridge not present in a 351W crankshaft.
How much HP can a stock 351 Windsor handle?
Capable of exceeding 700 hp each, we had more than 1,400 hp worth of turbos for the 351W.
Can a 351 Windsor be supercharged?
Complete kit will mount one TorqStorm® Billet Supercharger to the passenger side of a Ford 351 Windsor.
What’s the difference between a 351 Windsor and Cleveland?
Cleveland/Modified engines have the timing chain recessed into the front of the block itself, and its timing cover is essentially just a flat piece of metal. The Windsor’s timing chain attaches to the front of the engine and has an external timing cover typically made of cast aluminum.
How many cc’s are in a 351 Windsor?
The ‘Racing Boss 351’ (not to be confused with the Ford 335 engine Cleveland-based Boss 351) is a crate engine based on the 351 cu in (5,752 cc) Ford Windsor engine, but uses Cleveland sized 2.75 in (70 mm) main bearing journals.
Does a bore increase HP?
Boring an engine involves using machines to widen and taper the cylinders. From a performance standpoint, boring an engine could give you more horsepower and torque, as it will change the engine’s displacement.
Does increasing bore size increase power?
The short answer is that a bigger bore is generally the best way to get more power. It creates more space, allowing for bigger valve openings, which in turn can bring more fuel and air into the cylinder.
How much HP does a big bore kit add?
The most effective big-bore engine is the 250 four-stroke. By going to a bigger piston, enough to get it up to 270cc that can add as much as three horsepower.
Is the LS a copy of the Windsor?
No, the General Motors LS Series is NOT a Copy of the Ford Windsor V8. The Chevy vs. Ford debate goes back decades. It continues today just as it did during the Golden Age of muscle cars, covering everything from trucks and cars to engines and transmissions.
When did Ford stop making the 351 Windsor?
The Windsor (351W) was introduced in 1969 and stayed in use until 1991. The Cleveland (351C) was first used in 1970 on some early-production 1971 models, and was last produced in 1974, when it was replaced with the Modified (351M) model.
How much horsepower does a 408 stroker make?
Our entry level 408 stroker Ford performance engines boast an honest 450 horsepower and 500 torque and run on premium pump gas. This part number is perfect to upgrade from your old 351W.
What is a 408 stroker?
408 Chevy Long Block
Our 408 Stroker Crate Engine is built with a 350 block and a 4-inch stroker crank. That’s right! A 350 Chevy with the same block clearance as a 383 and a standard base circle cam houses a big block stroke and 6-inch rod. The torque in this thing will give you goosebumps!
Is a 351 Windsor a good motor?
Ford’s 351W engines are virtually bulletproof. The blocks, even on the 1975+ models, are very stout and will not give any problems until serious power is added. The rods, pistons, and other internal components are rock solid as well. Overall, the 351 Windsor is a tough engine and is built to take a beating.
What is the difference between 351 and 400?
The Ford 400 engine was based on the 351 Cleveland. It had a half-inch (12.7 mm) longer stroke than the 351 Cleveland, making it the longest-stroke Ford pushrod V8 engine.
Is it better to turbo or supercharge a v8?
For those looking to balance performance with fuel economy and efficiency, turbocharging is the better choice. For those more interested in a straightforward solution to raw horsepower, supercharging is more likely the way to go.
How much horsepower does a 1986 351 Windsor have?
351W – 390 HP – 430lbs Torque EFI (1986 – 1996) Ford Truck Engines.