Wood packaging imported into Canada is regulated under an international standard, ISPM No. 15, to prevent invasive species from being introduced into our country. This standard requires wood packaging to be heat-treated or fumigated and then marked to indicate that it has been treated.
What is the treatment required for wood packaging materials used in imports to Canada?
Wood packaging material entering Canada and originating from any country other than the continental United States, must meet the following requirements: The wood packaging material must be heat treated or fumigated using methyl bromide at rates specified in policy directive D-98-08.
Can I bring wooden products into Canada?
Canadians are free to import many wood products for personal and commercial use. Primary wood products, pulp and paper products, as well as wood-fabricated materials are all acceptable. This includes commonly used materials like planks, plywood, and industrial lumber.
Is ISPM 15 required for Canada?
Wood pallets traveling between the U.S. and Canada, moving in either direction, would, at a future point, have to meet the ISPM 15 standards for heat treatment and for markings.
What is ISPM 15 standards?
ISPM15 is the acronym for the International Standards for Phytosanitary Measures No. 15. It is a set of guidelines for regulating wood packaging materials in the international community and during trade.
Why do Canadian regulations only permit heat treatment for wood packaging?
Wood packaging imported into Canada is regulated under an international standard, ISPM No. 15, to prevent invasive species from being introduced into our country. This standard requires wood packaging to be heat-treated or fumigated and then marked to indicate that it has been treated.
What are the requirements for packaging materials?
Manufacturing and composition
The following requirements must be satisfied: packaging must be manufactured so that the packaging volume and weight is limited to the minimum adequate amount to maintain the necessary level of safety, hygiene and acceptance for the packed product and for the consumer.
How do you import wood into Canada?
Main Regulations:
Articles without bark and made of unprocessed wood materials will require a phytosanitary certificate. Wooden articles that are less than 1.5 cm thick and not containing bark will most likely be approved for import with no additional document requirements.
Can wood go through customs?
1.
All wooden, bamboo and similar articles imported for personal use are subject to import conditions, whether imported as passenger luggage, through the mail, via a courier service or through freight.
What items are restricted to bring into Canada?
Restricted Items
- Food. There are many rules and regulations regarding food items, especially things like fresh fruits and animal products.
- Weapons (including firearms) Check our page on importing a firearm or weapon into Canada for detailed information on this topic.
- Cars and other vehicles.
- Bait.
- Transmitting radios.
What information is required by law on packaging in Canada?
Under the law, all information on the label must be accurate and the packaging must not be misleading. The container or the packaging must be constructed, filled, and displayed so that consumers can clearly determine the quality and quantity of the product.
What is the Canadian consumer packaging and Labelling act?
The Consumer Packaging and Labelling Act is a regulatory statute that requires prepackaged consumer products to display accurate and meaningful labelling information to help consumers make informed purchasing decisions.
Does all packaging in Canada have to be bilingual?
Shipping containers destined to a commercial or industrial enterprise or an institution are generally exempt from bilingual labelling provided they are not resold to consumers at retail and all mandatory information for shipping containers is provided in one official language [B. 01.012(11), FDR; 205(1), SFCR].
Which countries require ISPM 15?
Countries participating in ISPM 15
- Austria.
- Belgium.
- Bulgaria.
- Croatia.
- Cyprus.
- Czech Republic.
- Denmark.
- Estonia.
Is all plywood ISPM 15 compliant?
It applies to the treatment of wood materials greater than 6mm, and it states a set of criteria that must be met when using any wood as packaging such as a crate, pallet, or dunnage. Products like cardboard, plywood, and plastic are exempt from ISPM-15.
What is ISPM 15 timber?
ISPM 15 applies to coniferous (softwood) and non-coniferous (hardwood) raw wood packaging material. This includes pallets, dunnage, crating, packing blocks, drums, cases, spools/reels, bulk heads, load boards, pallet collars and skids.
What Australian legislation controls the importation of timber & timber packaging?
ISPM 15
ISPM 15 and biosecurity
The Department of Agriculture, Water and the Environment (DAWE) is responsible for enforcing Australia’s biosecurity requirements, including ISPM 15. The conditions for importing solid wood packaging materials into Australia are available in Biosecurity Import Conditions (BICON).
What materials are exempt from the wood packaging material program?
WPM does not include manufactured wood such as plywood, veneer, fiberboard, particle board, corrugated board, or oriented strand board. Also excluded are loose wood materials such as shavings and excelsior, whisky and wine barrels, wine crates for vintage years prior to 2006, ammo crates, and paper products.
What is the title of the regulation around heat-treated pallets for wooden packaging materials?
ISPM15 is the industry standard regarding wooden pallets. The regulations state that all wooden pallets must be heat-treated prior to use and have an ISPM15 mark to show they comply.
What are the 6 requirements of packaging?
6 Required Functions of All Product Packaging
- To protect products from damage.
- To provide key information.
- To contain multiple items.
- To promote the product.
- To improve storage effectiveness.
- To consider environmental impact.
What are the 5 requirements for packaging finished products?
The 5 Stages of Packaging You Need to Consider in the Design…
- manufacturing.
- fulfillment.
- transportation.
- shelf life.
- user experience.